[Home ] [Archive]   [ فارسی ]  
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
Main Menu
Home::
Journal Information::
Articles archive::
Publication Ethics::
Peer Review Process::
Indexing Databases::
For Authors::
For Reviewers::
Subscription::
Contact us::
Site Facilities::
::
Google Scholar Metrics

Citation Indices from GS

AllSince 2019
Citations67964037
h-index2721
i10-index20497

..
Search in website

Advanced Search
..
Receive site information
Enter your Email in the following box to receive the site news and information.
..
Registered in

AWT IMAGE

AWT IMAGE

..
:: Volume 23, Issue 7 (2-2016) ::
Journal of Ilam University of Medical Sciences 2016, 23(7): 119-131 Back to browse issues page
Removal of Reactive Blue 19 Dye from Textile Synthetic Wastewater Using Reed Powder
Abstract:   (6849 Views)

Introduction: Textiledyes are one of the most common organic compounds that by entering  the industrial wastewaters cause  numerous environmental problems. So, the removal of these pollutants from  wastewaters is important. In this study, the efficiency of reed powder in the removal of Reactive Blue19dye from textile synthetic waste water was investigated.

Materials & methods: This research is an experimental study. Target adsorbent was prepared in laboratory scale and pulverized by standard ASTM sieves (60-100 mesh).In this study, the synthetic waste water was prepared with different concentrations of reactive blue19 dye(25, 50 mg/l). The effect of factors such as pH(3-11), amount of adsorbent(0.2-0.8 gr/l) and different time (15-120 min and 24h) were tested during the absorption process. According to studied factors, in total 300 samples were analyzed. For experiments a flask of 250 m L was used as a batch reactor. The residual dye concentration in the samples was measured using a UV/Visible spectrophotometer at 592nm wavelength. The adsorption potential of adsorbent was investigated by Langmuir and Freundlich models. In addition, the pseudo- first order and pseudo-second order kinetics for assessment of adsorption pattern were studied.

Findings: The results showed that the highest removal efficiency is at pH3. According to obtained results, maximum removal efficiency was in the first 60 minutes. With increasing initial dye concentration, the  removal efficiency decreased. The results showed that with increasing amount ofadsorbentfrom0.4to0.8 gr/100ml, removal efficiency does not change. So that, for concentrations of 25 and 50mg/l, the removal efficiency from 93.12%to95.41%andfrom90.83%to93.96%increased. Dye Adsorption isotherm using reed powder followed the Langmuir isotherm model. Adsorption kinetics data indicating a better fit with the pseudo-second order kinetic.

Discussion & Conclusions: The obtained results of this study showed that reed powder (in optimal conditions of pH, amount of adsorbent and contact time)is a natural adsorbent of appropriate and effective for the removal of dye.

Keywords: Isotherm, Reed powder, Adsorption, Kinetic
Full-Text [PDF 849 kb]   (3214 Downloads)    
Type of Study: Research | Subject: Environmental health
Received: 2014/09/29 | Accepted: 2015/08/18 | Published: 2016/02/24
Add your comments about this article
Your username or Email:

CAPTCHA


XML   Persian Abstract   Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Removal of Reactive Blue 19 Dye from Textile Synthetic Wastewater Using Reed Powder . J. Ilam Uni. Med. Sci. 2016; 23 (7) :119-131
URL: http://sjimu.medilam.ac.ir/article-1-2164-en.html


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Volume 23, Issue 7 (2-2016) Back to browse issues page
مجله دانشگاه علوم پزشکی ایلام Journal of Ilam University of Medical Sciences
Persian site map - English site map - Created in 0.14 seconds with 41 queries by YEKTAWEB 4666